(Continued from Part 1.) There are two additional items required to run a Raspberry Pi – a microSD card for storage and a power supply. I’ve set up, configured and run dozens of Raspberry Pis since they came out in 2012, and 90% of all of the problems I’ve ever encountered with them are the result of either a bad microSD card or inadequate power supply, so you don’t want to cheap out on either. For the microSD card I strongly recommend using a SanDisk MAX ENDURANCE model of at least 64GB, but bigger is always better, so get a …
The post A Local Disaster Network – Part 2, by J.M. appeared first on SurvivalBlog.com.
