USING STEPS

NOTE: the picture above only shows one operation situation, please read the user manual to know other three situations.

Four operation situation after connecting the clamps to your car battery:

• Stable Green Light: correct connection.
• Blinking Red Light with Buzzing Noise: incorrect (opposite) connection of battery poles. Please reconnect (switching clamps) and wait for the stable green light to indicate correct connection.
• Blinking Green Light with Buzzing Noise: voltage of the car battery is low. Please press the BOOST button and start car within 30s after getting a steady green light.
• No Light with No Buzzing Noise: the car battery is totally dead. Please make sure the connection is correct, then press the BOOST button and start the car within 30s after getting a steady green light.

General Question:

• The jumper cable makes a beep after being connected with the booster.

--- The power of T8 MAX is too low to start your car and you will need to fully charge it.

• The jumper cable is not long enough to connect two terminals of your car battery.

--- If the jumper cable is too short to connect the terminals of your car battery, please connect the red clamp to the positive pole, then you only need to connect the black clamp to the other metal part of car battery, it doesn't have to be connected to the negative pole. Then you could jump your car by following the using steps.